Jaw/Swage Bottlescrew Stainless for 4.0mm Wire Balustrade Kit #405
As low as$14.14
This handy stainless wire balustrade kit is used for staircase runs between metals posts, or where angles are required. Includes an M6 x 4.0mm Jaw & Swage Bottlescrew, an M6 x 4.0mm Fork Terminal, 2qty M6 Mini Eye Bolts and M6 Rivet Nuts
This handy stainless wire balustrade kit is used for staircase runs between metals posts, or where angles are required. Features an M6 x 4.0mm Jaw & Swage Bottlescrew , M6 x 4.0mm Fork Terminal and two (2) M6 Mini Eye Bolts threaded into M6 Rivet Nuts.
Suitable for 4.0mm wire including 7x7, 1x19 and 7x19 constructions. Because 1x19 wire rope has a higher tensile strength and is less flexible than 7x7 and 7x19, it is very commonly used with stainless swage fittings such as with this kit. 1x19 also has the least stretch over the same tension.
All in stainless steel 316, these fittings require hydraulic swaging/crimping. We have the hydraulic swaging tools available for purchase or hire (Melbourne only).
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
Incompatible With
Known Incompatible Products
We haven't added anything here yet.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
4.7 rating from 35 reviews
