A neat and slimline stainless steel balustrade kit for metal posts, consisting of Swage Stud Terminals (RHT and LHT) and Rivet Nuts (LHT and RHT). Hydraulic swaging required.
This stainless steel wire rope balustrade kit is very slimline, neat and aesthetically pleasing. This kit is for those who are looking to minimise balustrade wire fitting bulk.
Instructions
Pre-drill your 9mm post holes for the rivet nuts.
Using a rivet nut tool, install the rivet nuts.
Insert the wire rope into the swage stud terminal ends at each end of your run. These fittings require a hydraulic swaging tool. Crimp the swage terminals onto the wire.
Insert the RHT swage stud terminal into the RHT rivet nuts . Do vice versa for the LHT fittings. Thread with hands first and tension the swage stud terminals with a spanner.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
Incompatible With
Known Incompatible Products
We haven't added anything here yet.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
4.7 rating from 35 reviews
