Swage Stud Terminals & Hex Socket Tensioners Stainless Wire Balustrade Kit #65

Swage Stud Terminals & Hex Socket Tensioners Stainless Wire Balustrade Kit #65

Swage Stud Terminals & Hex Socket Tensioners Stainless Wire Balustrade Kit #65

From $9.14

To $19.00

A super neat and versatile stainless wire balustrade kit for areas supported with timber or metal posts. Comprises swage stud terminals and hex socket tensioners. Bevelled washers available to suit stair sections. Hydraulic swaging required.
Availability: In stock
SKU
WB-SSTHEX32-K65
Hex Socket Tensioner M6 Stainless Steel 316   + $0.00

Maximum 512 characters

For DIY purchase the wire separately here

For Factory Swaging wire the wire is purchased separately here:
7x7 3.2mm (most economical, higher stretch, rough weave)
1x19 3.2mm (stronger, least stretch, higher break load, smooth finish)

To calculate the amount of wire required:

Post-to-Post measurement x Number of runs

Example 1
Section 1: 11 runs x 3450mm; 37,950mm
Section 2: 11 runs x 5350mm; 58,850mm
Total Wire 96,800mm = 96.8 metres.
Add 97m to your order (Total Rounded Up)

Please Note: Any leftover/offcut wire for factory swaging will not be supplied. Any additional wire required should be purchased/ordered separately.

Current Factory Swaging Lead Time: 1 week

Swage Stud Terminals & Hex Socket Tensioners Stainless Wire Balustrade Kit #65
Swage Stud Terminals & Hex Socket Tensioners Stainless Wire Balustrade Kit #65

In stock

$9.14

Items Included:
    Description

    Slimline stainless steel wire balustrade kit.

    Install instructions

    Pre-drill your post holes. We recommend an 8.5mm hole diameter (the hex socket tensioner is 8mm in diameter).

    Cut your wire lengths.

    Insert the wire rope into the swage fittings at each end of your run.

    These fittings require a hydraulic swaging tool. Swage the swage stud terminals onto the wire ends.

    Take the hex nuts off the swage stud terminals.

    Thread the swage stud terminals into the hex socket tensioners at each end wire runs. Grab a small spanner or a shifter and grip the end of the swage stud terminal near the wire end, and tighten the hex tensioner with an allen key. Holding the swage stud terminal with a small spanner or shifters will stop the wire from twisting.

    For angled sections such as stairs, 8mm x 37 degree bevelled washers support the Hex Socket Tensioners. This results in a smooth, seamless wire balustrade run.

    For stair sections with thicker posts such as 90 x 90mm or more, choose the 75mm swage stud terminal.

    Specifications
    More Information
    Product Material Stainless Steel 316
    Swaging System Hydraulic Swaging
    Wire Rope Diameter 3.2mm
    Product Specifications
    • 2x Hex Socket Tensioner M6 AISI 316
    • 2x Swage Stud Terminal AISI 316, thread lengths below
    • a) 35mm x 90mm overall length
    • b) 48mm x 100mm overall length
    • c) 75mm x 126mm overall length
    Stock Availability In Stock
    Bulky item No
    Compatible With

    Known Incompatible Products

    • We haven't added anything here yet.
    • For technical requirements where you are unsure what products are and are not compatible please Contact Us.
    • Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
    Incompatible With

    Known Incompatible Products

    • We haven't added anything here yet.
    • For technical requirements where you are unsure what products are and are not compatible please Contact Us.
    • Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
    4.7 rating from 35 reviews
    Leave us a message
    * Attach upto 5 files (images/pdf)
    Ajax-loader bert2 blue-white