These M8 x 60mm Lag Eye Screws (Screw Eyes) are solid anchors for fixing to timber. Commonly used with 4mm wire balustrade fittings, and often supplied for espalier/trellis runs where the wire runs are 'standing off' the fence, requiring the extra torsional strength to handle the tensioned wire.
Note: photo is indicative of the product, but not an actual photo of an M8 x 60mm size.
You can simply and easily drive these into the timber post using a purpose built M8 lag eye screw driver bit. Pre-drill the timber post with a 5.5mm or 6mm diameter drill bit.
Specifications
More Information
Product Material
Stainless Steel 316
Wire Rope Diameter
3.2mm
Product Specifications
Lag Eye Screw
Stainless Steel 316
Length: 60mm (tip to base of eye)
Thread Length: 40mm
Eye Dia.: 8.5mm
Outer Eye Dia. 15.4mm
Shank Dia.: 7.9mm
Out thread dia.: 7.8mm
Brand
Various Brands
Stock Availability
In Stock
Bulky item
No
Compatible With
Known Incompatible Products
We haven't added anything here yet.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
Incompatible With
Known Incompatible Products
We haven't added anything here yet.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
4.7 rating from 35 reviews
